Part Number: TPS61099 Other Parts Discussed in Thread: TPS61299 , , TPS61033 Hi,
We are newly considering TPS61099 or TPS61299. These are types with variable switching frequency. Could you tell me in what range it can be changed? Or could you please…
Part Number: TPS61099 Other Parts Discussed in Thread: CC115L , TPS61299 , TPS63900 ,
Hi,
we plan a small keyfob with a MCU and CC115L RF, driven by a CR2032 coin cell. RF pulses will be at about 20-50ms long.
As CC115L consumes up to 30mA, any native…
Part Number: TPS61099 Hi Team,
We want to evaluate TPS610997 (fixed 5V) to P2P replace the adjustable TPS61099 in a 5V rail.
The datasheet recommends we tie FB to GND, but the internal block diagram suggests that the external FB network should have…
Part Number: TPS61099 Hello,
I'm designing a board with TPS610995, Vin between 0.8 and 1.4V. The EN pin will be controlled by a MCU powered by a 3.0V ULP pumpcharge regulator. Is it ok for TPS61099x to have a EN voltage (3.0V) greater than VIN voltage…
Part Number: TPS61099 I would like to put the outputs (3.5V) of two regulators in parallel.
A TPS61099 with a 3V battery connected to Vin and another buck regulator with a serial diode.
If the buck regulator is powered, it cuts the Enable of the TPS61099…
Part Number: TPS61099 Hi Team,
Can you have a look at the following customer inquiry, please?
We have been using the TPS61099YFFR boost converter in our product for years. This is responsible for supplying an RFID front end from a CR2 lithium-ion…
