Part Number: TPS61165 We are using TPS61165 in our Project but I am not able to find the LT Spice model of this.
Can you please provide the LT Spice model of
TPS61165
Hi Antonio,
I think that TPS61165 is a good solution, there is an FAQ for your reference : https://e2e.ti.com/support/power-management/f/196/t/811130
If you have any question. please let me know.
Regards
Sean
Part Number: TPS61165 Just to confirm I need to know if the Texas Instruments TPS61165DBVR can drive an LED strip 400mm long containing 12 LED’s. See below for a link to the LED strip. Each group of 3 ED’s seems to be driven in parallel. Totalling 100mA…
Part Number: TPS61165 Hello,
I would like to use TPS61165 in PWM mode, not in EasyScale.
I join picture of oscilloscope with :
CTRL : C3 orange line
VIN : C1 yellow line
FB : C2 green line
Lower window is a zoom around the beginning…
Part Number: TPS61165 Hello,
In one of our new designs we need to drive a 4.3” display, we found a reference design which uses the TI tps61165).
We wanted to check if this is the best chip for our application and also if it is better to have a PWM…
Part Number: TPS61165 Hi,
My customer use tps61165 in one of their display module, they use 47uF (16V, aluminum)+220uF (16V, aluminum)+0.1uF (ceramics) as the output capacitor, however, they faced with some output capacitor failure (C4).
According…
Part Number: TPS61165-Q1 Other Parts Discussed in Thread: TPS61165
Hi TI,
Can I use TPS61165 reference schematic(3s9p) below to drive https://www.jetone.com.tw/uploadfiles/327/datasheet/tianma/tianma-panel-tm080tdhg01-40.pdf ?
Is CTRL pin directly…
Part Number: TPS61165 We have designed this device into one of our products, a Microchip ATSAM devices is outputting 4 channels of PWM to 4x TPS based driver circuits which in turn drive 4 chains of LEDs (Red, Green, Blue and White). We seem to be having…
