Other Parts Discussed in Thread: TPS65930 , DM3730 Hi, All
I am working with our customer DM3730 board with PMIC chip TPS65930.
We run WinCE 6.0 R3 OS on the DM3730 board, but we found that the RTC time will be slower after a long time.
1. We…
Other Parts Discussed in Thread: TPS65930 Hi Gandhar,
we use the TPS65930 audio output together with the TPA2013, no microphone
Our configuration: (J1400 is open!)
Everytime we switch on the device there is a cracking sound once while initializing…
Other Parts Discussed in Thread: TPS65930 , DM3730 Hi,all
Power management:TPS65930
Platform:DM3730
The VMMC1.OUT voltage in the TPS65930 is 3.0V at +25℃ when the systerm power on;but the VMMC1.OUT voltage drops to 0.4V after temperature fall to…
Other Parts Discussed in Thread: TPS65930 Hello,
I am trying to erase the MT29F4G16 Flash using your Flash v1.6.0.0 program. I am successful using the RS232 UART. But I am not successful when I select USB. My set-up is as follows: My target is AM37xx…
Other Parts Discussed in Thread: TPS65930 , TPA2006D1 , AM3703 Hi,
I want to use TPS65930 audio codec for driving a mono 8 Ohm, 0.5W speaker. As per TPS65930 datasheet, it supports pre-drivers for stereo output but there is no mention about mono output…
Other Parts Discussed in Thread: TPS65930 Dear All
I have a question on TPS65930.
By looking at the Table 3-4 of TPS65930 Data Manual, SWCS037E, Vol and Voh specs are specified.
Although no DC conditions are specified there.
Q1: Don…
Other Parts Discussed in Thread: TPS65930 , DM3730 Hi all,
We have a design with the USB from the TPS65930 wired to a type A connector as we want to use it always as a HOST. We have tied the ID pin low through a zero ohm link and have some functionality…
Other Parts Discussed in Thread: TPS65930 , DM3730 Hi,
I am using kernel 2.6.32, on DM3730, and tps65930. Using tps65930 codec, for speaker and headset. When using the aplay to paly .wav file in headset as
aplay -Dplug:dmix Error.wav
With this…
Other Parts Discussed in Thread: OMAP3530 hi all,
we are designing customised OMAP3530 board, we have supposed to use TPS65930BZCH,but this is absolute now, so we are planing to use TPS65930A2ZCH.
please tell me what is the difference between them…