Part Number: TPS73433-Q1 Other Parts Discussed in Thread: TPS7A20 , TPS7A13 Let us confirm the specification of output noise voltage under Vin=3.8V, Vout=3.3V, Iout=250mA.
As capacitances, CNR=0.01uF, Cin=1uF, and Cout=20uF will be used.
From the…
Part Number: TPS73433-Q1 Other Parts Discussed in Thread: LP5907-Q1 Dear E2E Member,
Our customer use TPS73433-Q1, But we don't find any information about this Part have certification for AEC-Q100.
so, Did TPS73433-Q1 have have certification for AEC…
Dear Minqiu, thank you
Please, see my circuit
I looked that, instead of TPS71533, I can take a TPS73433-Q1 - it will certainly work at 3.6V input voltage.
TPS61099.docx
Hi Sergio,
The majority of my previous reply will still apply to TPS73433-Q1 as it applies to all LDOs with a brick wall current limit. Current limit is a protection feature for a fault condition outside of recommended operating conditions where the…
Thank you Sir.
For my better understanding, please clarify me. whether i want to connect pin no 29 (IO21_9 - TDIS output) of CPLD to ground. Am i riight Mr.Pablo. Or what i want to do. Please find the attached schematic to clarify my Query Sir. Your…
Dear Mr.Jean-Marc Mifsud
For your reference i would like to attach the Schematic diagrams also. page 13 and 14 is for FTDI and CPLD in the Schematic diagram
4137.PNEUMATIC CONTROLLER1.pdf
Please support me to step forward in my project.
Part Number: RM57L843 Other Parts Discussed in Thread: HALCOGEN
Tool/software:
Hello,
We are using the Hercules HDK RM57 reference board for development which has an EMIF SDRAM 64MB part with what our HW team understood to be 13-bit EMIF Address…
Hi Vijay,
I verified TI_HDK schematic of TMS570LC4357
Here i found that D9 and D10 are not terminated out, i mean they are not routing to any connector. So, where exactly you are tapping and verifying these signals?
There are some wrong names…
