Part Number: TUSB1046EVM As many say, design files posted to the TUSB1046EVM are not the correct ones for the actual EVM. Please send me the design files for this EVM, specifically INT053-001.
Thank you!
Hi Haidong,
David is out for the week, so I'll be here to answer your questions on the TUSB1046.
From what I can gather, we are trying to drive the HPDIN pin high to enable DP ALT-mode functionality. You can see from the 1046 datasheet that a low…
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TPS65987D Hi Expert,
Which CC controller do we are recommend using with the TUSB1046? Customer want to use low-priced CC controller.
Cheers,
Far
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TUSB1046-DCI Hi
we are finding the scheme of DP ALT mode with Type-C. That is, in soure side, DP signal to Type-C interface.
And we found that "TUSB1046EVM" could release the above function. and…
Part Number: TUSB1046EVM Hi,
Our design is as follows:
DP source -> Redriver (not TUSB1046) -> Type-C IF -> Type-C USB-C cable ->Type-C Monitor.
Since TPYE-C IF has positive and negative interpolation, the source side should know the interpolation…
Part Number: TUSB1046EVM Please help to provide the TUSB1046EVM REV_A2 Gerber file. I had find the Gerber file is not correct for my EVM board. I attached my board picture below for you reference.
BR, Gary
Other Parts Discussed in Thread: TPS65982 , TUSB1046EVM , TPS65981 i have a TUSB1046evm, the default PDO is PDO1, so how to change to PDO2, since the PD chip TPS65982 can have these PDOs, thanks.
Hi Aya
Long time no see I made a new board and checked it... but the monitor output is still not working.
In the case of the EVM board, if you connect the USB C type port to the monitor, you can check 5V on VBUS,
but the board I made cannot check the power…
Part Number: TUSB1046EVM Other Parts Discussed in Thread: TPS65987D , TUSB1064 Hi team,
Does the TUSB1046EVM can demonstrate DP alt mode source to connected monitor? Is there other device needed such as PD controller TPS65987D?
Regards,
Hayashi
Part Number: TUSB1046EVM Other Parts Discussed in Thread: USB2ANY Hi TI Suppport,
I'm looking to develop an application using the TUSB1046 chip, and have purchased the EVM. Looking into the manual, looks like I'll need to provide a DP signal and a USB…