Part Number: UCC28700 Hi team,
In the application note SLUA783, it is said that the customer should care about LC period that it should not exceed T_ZTO to maintain proper valley switching.
In the datasheet for UCC28700, T_ZTO is spec'd at min 1.8us…
Part Number: UCC28700-Q1 Hi TI Team,
Requesting to provide UCC28700-Q1 IC, CS pin input leakage current , which will help in our design. Kind regards, Vamsi Bankuru
Part Number: UCC28700 Hi team,
My customer wants to make the device start up faster and wants to lower the Rstr value from 13M~20Mohm which was the recommended value shown in the datasheet.
My customer understands that Rstr should be set by the below…
Part Number: UCC28700 Hi TI experts,
I have a question about UCC28700.
1. Why the VDD connect to VBLK and Vaux. what's Vcc power up sequence?
2. Why we need to use this diode? what's the function of this diode? can we remove it?
3.What is discriminator…
Part Number: UCC28700 Hi I am currently working on my masters thesis where I will compare results of surge and burst simulation to real world measurements. I am using LT Spice and for that reason I would need an unencrypted model of UCC28700 to be able…
Hello Adrien,
PSpice is the newer software but TINA-TI should work as well. The PSpice model is unencrypted so you will be able to modify the model. You cannot externally change the CS threshold but you can set up COMP differently so that the CS equivalent…