Part Number: UCD3138128 Other Parts Discussed in Thread: , UCD3138 Hi Team,
My customer change the UCD3138128A to UCD3138128.
They see his board will reset when they test the surge CM2.0KV from system side through in.
and they try to turn the reset pin resistor…
Part Number: UCD3138128 Hi,
We are designing a socket board for customer to program UCD3138128PFCR on our off-line programmer.
After we programmed the IC and found out that it was unavailable to get into ROM mode and cannot communicate via Slave Address…
Part Number: UCD3138128
Hi Team,
Customer now found out that the undershoot voltage on Pin15/Pin16 is exceeding -0.3V lasting 8.4ns, and the maximum undershoot voltage can reach -0.46V_AC. Please help us judge whether this undershoot can meet our device…
Part Number: UCD3138128 Tool/software: Code Composer Studio Hi Sir,
I would like to use UCD3131128, and it has 4 flash banks.
My code cannot be compiled successful due to my code is more than 32k and the flash size (PFLASH) is fixed by cmd file.
Could…
Part Number: UCD3138128 Hi
This device has an oscillator. And the clock frequency is defined as below.
Those spec include the aging (deterioration)?
The customer would like to know the deterioration of the clock frequency over time.
Does the frequency…
Part Number: UCD3138A Other Parts Discussed in Thread: UCD3138128 , , UCD3138 Hello TI friends,
Now we want to use UCD3138A for two DC/DC covert design, the first is buck, the another is boost. We want to refer to the design of BidirectionDCDC, but the…
Part Number: UCD3138128 Other Parts Discussed in Thread: UCD3138 , hi All,
I can find the Input capacitance is 10pF for ADC pin in UCD3138 SPEC. But I can not find Input capacitance for digital inputs/outputs pins. Does anyone knows the Input capacitance…
Hello
Yes, the above summary is correct.
I have not made changes in PFC firmware for event update window,
as it is already present in UCD3138FW-PFC .
#if ((UCD3138A==1)||(UCD3138064A==1)||(UCD3138A64A==1)||(UCD3138128A==1)||(UCD3138A64==1)||(UCD3138128…
Part Number: UCD3138128 Hi,
Our customer had question related with the GPIO input voltage versus VDDIO.
At datasheet , there were recommended maximum VDDIO (3.6 volt) and the absolute maximun input voltage (3.8).
However , customer review the limitation for…