Part Number: WL1807MOD Hello!
We have 1 design already in production (since 2018) that uses this module and a new one currently going through RF compliance testing.
The datasheet for this module recommends 3 inductors from Murata for the RF outputs…
Part Number: WL1807MOD Hi Team,
On WL1807MOD, which county will be covered by Country code "EU"?
Will it cover United Kingdom and Turkey which used the same EN directive but not belong to EU?
Do United Kingdom and Turkey have their own Country…
Part Number: WL1807MOD Hi team,
I am using the WL1807MOD chip, but after recompiling the kernel after enabling CONFIG_NL80211_TESTMODE,i can't use the calibrator tool. For enabling PLT Mode ,I cant find wl18xx directory in /usr/share as described in…
Part Number: WL1807MOD Hello WiFi expert,
I refered Wlink8 WLAN Feature guid , https://www.ti.com/lit/ug/swru423a/swru423a.pdf .
In 5.10.2 Whitelist, It describes
Whitelist refers to a list of MAC addresses from which connection or acknowledgment…
Part Number: WL1807MOD We are using WL1807MOD Wifi module in our device and a third-party Wifi stack. Our application is such that three SSIDs can be configured in it. The device will automatically search for next SSID if the previous one is not available…
Part Number: WL1807MOD Hello,
I am looking for video streaming solution for drones and I came across this application note: https://www.ti.com/lit/wp/spry301/spry301.pdf
WL18X7 will be suitable for my application since I need data rate of atleast…
Part Number: WL1807MOD After starting wpa_supplicant in Mesh mode, it is impossible to scan wifi networks with a command like:
iw dev wlan0_mesh scan
The command returns:
command failed: Device or resource busy (-16)
This is due to this code block…
Part Number: WL1807MOD Hello Sandeep,
We have a concern as our end product (inverter) has another radio frequency device (GSM/NB IoT module) whose antenna will be co-located along with the WiFi antenna and can operate simultaneously.
In such case…
Part Number: WL1807MOD Other Parts Discussed in Thread: WL1837MOD Our product uses TI WL1807. The firmware version is R8.8. Have used configure_devich.sh with no of 2.4 and 5G antenna as 1. Configured to SISO20. The selected INI based on that is WL1837MOD_INI_FCC_CE…
