Juergen,
If the TXS0108 is on the top layer, then it does not have solid GND plane on the same layer, correct?
How are you sourcing power to the WL1807MOD and TXS0108?
Can you confirm that your power-up sequence follows Figure 5-2 in the datasheet…
Nomo,
We certified the WL1807MOD with the Pulse antenna, W3006. This antenna's 2.4GHz and 5GHz gain are 3.2dBi and 4.2dBi respectively. According to Section 6 of the WiLink Module Hardware Integration Guide , the max gain values of the approved antenna…
Could you please tell me the behavior of WoWLAN mode in the following scenario:
What if the host wakes up due to an interrupt from a different wake-up sources. Our design has multiple wake-up sources configured.
In this scenario will WL18xx module…
Part Number: WL1807MOD Hi,
Is WL1807 module supports WPA3 protocol with any upgrade? as latest recommendation from wi-fi alliance is that, the products should support WPA3 for certification.
Part Number: WL1807MOD hello
i am using the WL1807MOD in a custom board, and interfacing it with an stm32f205 using the SDIO interface.
is there any documents about the command used to setup the WL1807 using the SDIO interface.
regards.
Zakar…
Part Number: WL1807MOD Hello, our client needs the possibility of connecting 100 clients for 1 AP. Do you have a firmware for the WL1807MOD module which would give this functionality even at the cost of other functions. I know from the documentation that…
Part Number: WL1807MOD Hi, We want WL1807MOD IBIS model. I found the following e2e web site and I got the ibis file. e2e.ti.com/.../615305
Looking at the contents of this 185x.ibs file, it seems that the pin assignment is different from WL1807MOD. example…
Part Number: WL1807MOD Hi,
We would like to know about the following 2 points about antenna selection in WL1807 5GHz.
Our customer want to configure output 5 GHz RF signal from ANT2 with RTTT-Tool. It can only select “Auto” or “Ant1” as Antenna selection…
Part Number: WL1807MOD Tool/software: Linux Hi Champs,
We would like to know following question.
If you know 1) question, please prior to answer 1) first.
1)Could you please tell us how to adjust ACK time out parameter ?
2)Do you have measure…
