Part Number: XTR116XTR116
Problem 1. Can't get full range output only 4-12mA. Input PT1000. Supply 12 to 24 Vdc. Problem 2. Can't get relay to operate or adjust relay setpoint.
I can send layout, but it can't be public available.
Part Number: XTR116 Hi Amps,
What is the difference between XTR116U and XTR116UA? I did look at the datasheet and all of the electrical characteristics seems to be same, even the packaging info seems to be the same?
Rgds, Kris
Part Number: XTR116 Other Parts Discussed in Thread: TIPD190 Tool/software: WEBENCH® Design Tools I am using XTR116U/2K5 device for getting 4 - 20mA output current.
I have seen the reference design TIPD190.
I would like to know - Which resistor we can…
Part Number: XTR116 Other Parts Discussed in Thread: XTR115
Hello,
Is it possible to get the TINA TI spice model for XTR116. I have tried with below 4-20 mA Loop Analyzer but it is not working as expected. I tried with 500mv and 800mV input voltage…
Part Number: XTR116 Other Parts Discussed in Thread: XTR115 , XTR111 Hello!
I made the silly mistake of ordering a XTR116 without properly reading the datasheet and now i have no external transistor which i definitely need.
Im struggling to understand…
Part Number: XTR117 Dear XTR and DAC Team,
Can you help me with the identification of the Iret pin isolation component for the below details.
Regards
Wasim
Part Number: XTR116 Hi , I created the circuit below :
I can control between 16-20 ma normally. On the DAC side, I can monitor that the voltage is between 0-4095.No problem. But I have never seen less than 16ma. And I can see VCOMPLIANCE more than +7.5…
Part Number: XTR116 Other Parts Discussed in Thread: XTR111
When I first energize, the XTR116 draws 80 ma current. Since there is too much voltage drop over the 250 ohm resistor, the supply voltage (V + and IO) of the XTR116 drops below 7.5 volts…
Part Number: XTR116 Hi,
Can you please share the continuous output current of VREG pin of XTR116.
Its short circuit current observed as 12mA in the datasheet.
Part Number: XTR116
I have built and deployed many boards out into the field using the XTR116 in an isolated configuration.
This design has always worked well and is stable on the bench, but now I being told that the the 4-20 output occasionally "drifts…