Part Number: AFE4403EVM Other Parts Discussed in Thread: AFE4403 Tool/software: 1) According to the user guide, the EVM can be used with the SFH7050 sensor. When purchasing the AFE4403EVM, is a board with the SFH7050 already soldered included, along with…
Part Number: AFE4403EVM Dear all,
1. May I ask if there are other sensor board versions available for evaluation, such as OSRAM 7060 or OSRAM 7072?
2. Regarding continuous measurement data logging: based on the file content, it seems the system stores…
Part Number: AFE4403EVM Hello support forums,
AFE4403EVM is used to change the timing of LED sampling. LED2 is not used, so I changed the setting to 0. The value of LED1 is no longer responding. What is the problem?
Regards, Katouno ,
Part Number: AFE4403EVM Other Parts Discussed in Thread: AFE4403 Hello support forums,
I am using the AFE4403EVM GUI to evaluate the sensor signals. When I check the same sensor with my own board and my own APP GUI, I see noise in the same waveform…
Part Number: AFE4403EVM Is it possible to operate the AFE4403EVM Kit, set breakpoints in the firmware source, and check the association between the operation of the application and the operation of the firmware?
Part Number: AFE4403EVM Hi, Good day. Our customer is trying to configure the AFE4403EVM with the SFH7050 sensor to read from the three LEDs (red, infrared, and green) Can you please help with the configuration? The manual that comes with board only tells…
Part Number: AFE4403EVM Other Parts Discussed in Thread: AFE4403
Hello,
I have two thing to discuss:
1. I am using AFE4403 EVM, In the datasheet of AFE4403, it is mentioned that the output waveform is Inverted.
Can you make it clear that is…
Part Number: AFE4403EVM I'm using the AFE4403EVM along with the TI GUI to get PPG signal from my finger. For the Rx configuration, I use DAC cancellation current of 0.
I see a plausible signal in the LED1 and LED2 channels.
I expect to have small…
