Part Number: CC2642R-Q1
We are using the Simple Peripheral example code with all default parameters- the device is continuously advertising
We are measuring the current consumption of board by using voltage drop across a 100R series resistor
We are seeing…
Part Number: CC2650MODA Other Parts Discussed in Thread: BLE-STACK , AM3352 Hi Expert,
I am communicating with the CPU and BLE Module, but I have confirmed that the SRDY signal during continuous communication from BLE does not meet the timing requirements…
Part Number: CC2340R5 A customer has met a problem that UART lost packet when used together with BLE stack. They did some debugging and located the issue is likely caused by the global interrupt disabled by the stack. I would like to confirm if the BLE…
Part Number: CC2652PSIP Hello,
When ADDRMODE_PUBLIC is selected, BLE stack takes MAC BLE address from the registers: CCFG_IEEE_MAC_0 and CCFG_IEEE_MAC_1. What is the easiest way to use registers: FCFG1_0_MAC_BLE_0 and FCFG1_0_MAC_BLE_1 for the initialisation…
Hi Alex,
I would check that you dont have RPA enabled on your example, be default it is. You can read more about what RPA (Resolvable Private Address) is and does check the user guide.
https://dev.ti.com/tirex/content/simplelink_cc13xx_cc26xx_sdk_7_10_00_98…
Part Number: CC2640R2F Other Parts Discussed in Thread: BLE-STACK , Hello, we have a problem probably related to the ble-stack on our hardware. The chip being used is the CC2640R2F.
The ble-chip runs using passive scanning mode. We are reading GAP_Advertiser…
Part Number: CC1352R Hello,
Custom Stack Description:
I use Custom Stack, which accesses the radio using EasyLink. This Custom Stack uses 5 kbps SimpleLink Long Range as its physical layer. It is implemented with the use of SDK in version 5_20_0_52. The…
Part Number: BLE-STACK
Hii,
i am working with basic_ble example and started UART in callback mode and whenever i am calling any api like osal_snv_write of osal_snv_read or HCI_EXT_SetBDADDRCmd or trying to send notification to connected BLE client…
Part Number: BLE-STACK Hii, i am using CC2340 basic_ble example and changing the advertising name in runtime using UART command and i am able to use do this succesfully but the problem is after changing the scan response or advertising data i am disabling…
Part Number: CC2652R7 Other Parts Discussed in Thread: CC2640 Can you please confirm that our latest BLE SDK includes the following features:
GLS (server) TIP (client) GAP (server & client) DIS (server) BAS (server)
Thank you!