Yes, as the CC2538EMK does not have a XDS100v3 debug probe. This is provided by the SMARTRF06EBK and the direct CC2538EMK connection is for USB peripheral interfaces, you can download CC2538-SW for more information and examples.
Regards, Ryan
Other Parts Discussed in Thread: CC2538 I recently purchased some development kits with CC2538DK on it. The software from Texas instrument is not available for Linux so I was wondering, what will be the best software to use these kits in Linux?
Part Number: CC2538DK There has some error when I use the OpenVisualizer to organize the wireless network. If anyone is familiar with OpenWSN stack? It doesn't work after I port the code to CC2538DK.
The slave mote can not identify the EB packet contain…
Part Number: CC2538DK Hi,
I know from datasheet that minimum tx power is -24 db which is equal to set the txpower register to 0x00.
I have done it in contiki by contiki function but still nodes can hear each other from the distance of almost 20 meters…
Part Number: CC2538DK Hello!
I have the CC2538 Development Kit. I'm using SmartRF Studio 7, with one board being configured as Packet Tx and the other configured as Packet Rx. I know you can obtain the RSSI value from SmartRF Studio, but I'm wondering…
Part Number: CC2538DK Hi Team,
Our customer is looking to connect CC2538DK with Raspberry pi. Shes planning to use it for planning on using it for trilateration. So she'd need a star network of five nodes in total.
I saw a post below that mentioned…
Part Number: CC2538DK Hello sir,
I am using z-stack mesh 1.0.0 generic app example. I want to transfer the analog signal data to coordinator from multiple enddevices. I need 1 sample per minute from each node my input signal is about 1hz.
1) in the rest…
Part Number: CC2538DK Hello!
I'd like to connect the CC2538 devices to an STM microcontroller or a Raspberry Pi using a shield. Basically, I'm looking for a shield to replace the SmartRF06 so I can connect the CC2538 to a microcontroller. I've…