Other Parts Discussed in Thread: CC2538 , MAX3232 Hi, We have purchased CC2538 zigbee development kit and we intend to connect CC2538's UART port to a host PC. With this regard, I have connected a MAX3232 based (TTL to RS232) adapter board to the UART…
Hi,
Can anyone point out what is the response to the discovery cmd from coordinator?
I referred some documents but i was not able to figure out.
I wand to communicate my end device with a gateway. But after associating, my end device cannot communicate…
Other Parts Discussed in Thread: CC2538 Hello,
We are using the CC2538 for our Mesh Network PcB using the Contiki stack. We made 2 PCB Versions - like the reference Design with some extensions, however we have several Problems:
1.) We connected…
Part Number: CC1311P3 Other Parts Discussed in Thread: CC2538 , CC2652RB , SYSCONFIG Tool/software: We are working with CC1311P3 part number on our custom design board. While enabling UART bootloader for flashing SW, we are encountering following error…
Other Parts Discussed in Thread: CC2538 Hi,
I am able to use GPTimer 2 to generate a PWM output on my CC2538 . Now I am trying to use the DMA to update the Timer A Match register on each time-out. But the DMA transfer does not happen because it is…
Other Parts Discussed in Thread: CC2538 We need to use this Evaluation modules design in our new product. But one change is here in our product.
We do not use the USB section. So can we remove whole the section related to USB in our design,which is…
Hi
I am using CC2538-CC2592, and SmartRF06 Evaluation Boards; but when I power up my evaluation boards: is not showing up on the display. I am interested to get the path for the firmware that was loaded from factory for CC2538-CC2592. I programmed my…
Other Parts Discussed in Thread: CC2538 , Z-STACK Hello all,
I am using zstack 1.20 HA and cc2538 and using thermostat as (ZC) and temp sensor as (ZED).
i know how temp sensor is sending data to thermostat... but till now i didn't understand the proper…
