Hi,
Yes, you need to change the values of Caps in small increments/decrements to adjust the Frequency accuracy.
Attached is the App note SWRA640 on the guidelines for Hardware Configuration and PCB Layout for further reference.
swra640a.pdf…
Part Number: CC2640 Other Parts Discussed in Thread: CC2592 , CC2650
Hi Team,
customer has some question, please kindly support it.
thanks!!!
Hello, during the process of using CC2640F128RHB, we found that the signal transmission distance of…
Part Number: CC2640R2F Other Parts Discussed in Thread: CC2650 Tool/software: Code Composer Studio The security_examples_central project is available from the TI SimpleLink GitHub page in TI SimpleLink GitHub Code Examples , as picture 1 shows , which…
Hello Ryan,
I have gone through the Components\hal\target\CC2538 & able to found that there is max limit to BR set to 115200 ,
In function ( uint8 HalUARTOpenIsr(uint8 port, halUARTCfg_t *config) ) it is mentioned that,
if (config->baudRate > HAL_UART_BR_115200…
Hi,
I've attached the 2013 User's Guide for power products. Starting on page 53 you will find a selection of PWM controllers. many of these teh frequency can be varied according to external criteria.
As an example if you use a UC3842 it is a simple…
Gary,
Most any of our power controllers with dual output capability will provide the control. See attached document starting at page 50 with the dual output controllers on page 53 and 54 and choose what features you want.
Regards,
John
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
