Part Number: DRV8703-Q1 Other Parts Discussed in Thread: DRV8702-Q1 , I am using a DRV8703-Q1 (SPI version of the DRV8702-Q1) in a 12V automotive application.
We are seeing a failure rate between 10-30% in a larger prototype batch of boards (sample…
Part Number: DRV8703-Q1 Hi,
My customer is using DRV8703-Q1, and they are trying to brake the motor, and it is not working correctly.
The Hbridge driver is in Mode 0,
In how much time should the motor stop ?
How slow is the slow decay…
Part Number: DRV8703D-Q1 Other Parts Discussed in Thread: DRV8873 what is the advantage and inconvinent for using a full-bridge or two of a half-bridge
Part Number: DRV8703-Q1 We had a situation where a DRV8703-Q1 was killed our application. We observed overvoltage spikes at the terminals SH1 and SH2, caused by the DC motor, connected to OUT1 and OUT2. We assumed that this was the reason for the malfunction…
Part Number: DRV8703-Q1EVM Other Parts Discussed in Thread: DRV8703-Q1 HI,
actually i am trying to control the Brushed motor either in forward or reverse direction by using evaluation board DRV8703-Q1 EVM.
1.in PH/EN mode, motor is not running ,even…
Part Number: DRV8703-Q1 I would like to keep my analog reference signal from my uProcessor to the Vref pin (pin 15) as clean as possible in circuit board layout. The reference signal from the uProcessor is in relation to it's analog ground, so I would…
Part Number: DRV8703-Q1 Dear all,
one of my AA is using the DRV8703-Q1 to drive a motor. Everything works fine at room and hot temperature, but at -40degC the DRV8703-Q1 goes in VDS fault condition.
It could be related to the MOSFET, but even removing…
Part Number: DRV8703-Q1 Hello, I am currently using the DRV8703QRHBRQ1 in the configuration found in the EVM. However, I would like to use the part in a slightly different way.
I would like to supply the PVDD pin with 12V (which is above the 5.5V…
Part Number: DRV8703-Q1EVM Other Parts Discussed in Thread: DRV8703-Q1 , Dear Support team,
Our customer will use DRV8703-Q1 in their application. They are using the DRV8703-Q1EVM to check the occurrence of a flag when a fault is detected. Please tell…
