Part Number: AM62L
Tool/software:
Hi Board designers,
AM62L: Custom board hardware design - FAQs related to Processor collaterals, functioning, peripherals, interface and EVM
Regards,
Sreenivasa
Part Number: C2000WARE Other Parts Discussed in Thread: C2000-GANG , UNIFLASH
Tool/software:
1. Which 3 rd party programmers do you recommend for C2000 MCUs?
Answer:
Some of the recommended 3 rd party programmers are from these vendors - Acroview, Algocraft…
Other Parts Discussed in Thread: BQ25882 , BQ25883 , BQ25886 , BQ25887
BQ2588x FAQ Home Page
This home page is for common questions in relation to the BQ25882, BQ25883, BQ25886, and BQ25887.
FAQs
------------------------------------------------------…
Part Number: PROCESSOR-SDK-AM62X
Tool/software:
Greetings,
When working with a flash part like S25HL512T or S28HS512T , one will come across Uniform vs Hybrid mode.
The points which this FAQ covers is:
What is Uniform vs Hybrid Mode for the flash.
Which…
Part Number: TDP142 Other Parts Discussed in Thread: TDP2004 , , TDP1204 Tool/software: Hi Experts,
What does 'Linear range' refer to on re-drivers like TDP142, TDP1204, TDP2004,...?
This issue is happening due to board version mismatch as the new revision boards (PROC159A) have a flash reset mechanism similar to am263px-lp. The ospi flash reset signal is directly coming from the SOC and not via IO expander, which was the case in…
This is a known issue where parts out of a specific manufacturing site were marked with an incorrect device marking. Because the 'A5' is an incorrect marking for the device, 'A5' will not show up in the datasheet. Any device received with…
Part Number: AM6412
Tool/software:
Hi T.I community expert,
1) There is something which is not clear about MMC0_CLK recommandations:
When looking at the datasheet (2024) table 5-80 one can read the following :
==> MMC0_CLK can be left open when…
