/cfs-file/__key/communityserver-discussions-components-files/667/TI-Bluetooth-Stack-for-WL18xx-_2D00_-Getting-Started-Guide-_2D00_-Texas-Instruments-Wiki.pdf
This is the best i could find, it still asks me to build TI-BT_STACK_LINUX-ADDON and then move…
Hi,
We, are in the process of updating the BluetopiaPM getting started guide. But, in the mean time attached is the pdf file of the above mentioned wiki link.
With regards to BT sound driver - We, have 4.14 based BT audio driver patches for AM43x…
Hi Gigi,
Hardware team verified the checklist and attached is the answers in line in the attached excel.
We have 51K Pull Down with WL EN and BT EN but it is after level translator (3.3 --> 1.8) chip TXS0108ERGYR. If you want our schematic, give us…
Hi,
WiLink8 drivers are upstreamed and are part of open source linux kernel .
I am not familiar with MCM-iMX8M-Mini but back in the day we did integrate WiLink8 with iMX EVM. You can probably refer to this : /cfs-file/__key/communityserver-discussions…
Hi,
I have attached pdf wtih wiki page contents you referenced above
/cfs-file/__key/communityserver-discussions-components-files/968/WL18xx-First-Time-Getting-Started-Guide-_2800_IMX6_2900_-_2D00_-Texas-Instruments-Wiki.pdf
Best
Saurabh
Hi Shiva,
I may be able to test this, but I do not have the same hardware setup as you. Are you able to take HCI logs according to this guide?
bt_logger_tool.pdf
From what I can tell, it looks like your device is configured for single channel. You…
Hi Robin,
Would you be able to provide either HCITester or BT Firmware logs? Please see the attached PDF's on instructions to gather these logs. This will help us to further diagnose what might be causing the issue.
CC256x Logger User Guide.pdf HCITester…
I did some checking, and the best way to apply the HCI_VS_DRPB_ENABLE_RF_Calibration command is through HCITester. HCITester allows you to send specific HCI commands to the bluetooth stack, or create automatic scripts which send many commands at once…
swru581.pdf
Hi,
we are also trying to add the assited A2DP mode in cc2564MODA module, we has followed the "swru581.pdf" Document.
but, we are unable to load the script, we are getting "Device or Resource busy" error. Could you please suggest what…
