Frequent Questions

  • [FAQ] How far apart can the two systems be with TXG I2C devices?

    Other Parts Discussed in Thread: TXG8122-Q1 Since the I2C protocol limits the allowable bus capacitance to 400pF (for Standard and Fast Mode) or 550pF (for Fast Mode+), similar requirements will need to be implemented on the TXG8122-Q1. There are…

  • [FAQ] Will TXG QFN packages support wettable flank?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ At the moment TXG QFN packages do not support wettable flanks. However, we are working towards supporting wettable flank packages once products are fully released. The QFN…

  • [FAQ] What is the leakage between 2 grounds?

    Other Parts Discussed in Thread: TXG1041 FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ The leakage between two grounds can be found under the Electrical Characteristics section in the datasheet. Using the TXG1041 datasheet…

  • [FAQ] Can TXG be used as a simple level translator / buffer?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ The TXG product family can be used as a regular level translator (VCCA > VCCB or VCCA < VCCB) or in a buffer configuration (VCCA = VCCB). If a user doesn’t need ground shifting…

  • [FAQ] MCU-PLUS-SDK-AM263X: SBL QSPI ENET missing python file "enet_uniflash.py"

    Part Number: MCU-PLUS-SDK-AM263X Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi TI experts, I'm trying to run the sbl_qspi_enet application on AM263x. I see that the documentation ( software-dl.ti.com/.../EXAMPLES_DRIVERS_SBL_QSPI_ENET_AM263X…

  • [FAQ] BQ25798: Recommended backup mode operation

    Part Number: BQ25798 Tool/software: Backup mode is expected to work as follows: Host software sets (arms) EN_BACKUP=1 while input source is attached at VBUS Input voltage fails below backup mode trigger point = %*VINDPM Backup mode engages setting…

  • [FAQ] TXE8116-Q1: What is the Difference between I2C and SPI IO Expansion?

    Part Number: TXE8116-Q1 Other Parts Discussed in Thread: TCAL6416 , TXE8124 , TXE8116 Tool/software: FAQ: Logic and Voltage Translation > IxC and SPI >> What is the Difference Between I2C and SPI IO Expansion? Both I2C and SPI I/O expansion solve…

  • [FAQ] CC2745R10-Q1: CCS 20.3.0 Secure Debug Manager libary not loaded

    Part Number: CC2745R10-Q1 Tool/software: Issue: When trying to flash or debug a CC27XX using CCS 20.3.0, the following error is reported: Cortex_M33_0: Flash loader: CC23xx_CC27xx_FLASH_LIBRARY_VERSION 4.1.0.141 GEL: Error while executing OnPreTargetConnect…

  • [FAQ] TDA4VM: What is the K3 Resource Partitioning tool and how do I use it?

    Part Number: TDA4VM Other Parts Discussed in Thread: SYSCONFIG , TDA4VH-Q1 Tool/software: What is the K3 Resource Partitioning tool? What is it useful for within my application? How do I use it?

  • [FAQ] TDA4VE-Q1: R5F Exception Recovery

    Part Number: TDA4VE-Q1 Tool/software: Hi, Could you explain the steps to recover from exception in R5F.

View FAQ threads
Recommended For You