Hi Team,
Our customer ask the Vdd1 unpowered and Vdd2 is powered will let IC damage ? Or just run in the full positive and full negative output swing status , but the IC still is good.
Please help me to fix this concern. Thanks!
Eddie
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
Our customer ask the Vdd1 unpowered and Vdd2 is powered will let IC damage ? Or just run in the full positive and full negative output swing status , but the IC still is good.
Please help me to fix this concern. Thanks!
Eddie
Hi Eddie,
There is no issue to have VDD1 powered off while VDD2 is applied to the AMC1200. The output will go to full-scale + or full scale -. You will not damage the chip.