Hi Sir,
Good Day
ISO124U/1K
C OPAMP ISOLATION 1 CIRC 8SOIC
I would like to request to share recommended land pattern for above mentioned part.
It's urgent please share as early as possible.
Waiting for your reply,
Regards,
Minesh
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Sir,
Good Day
ISO124U/1K
C OPAMP ISOLATION 1 CIRC 8SOIC
I would like to request to share recommended land pattern for above mentioned part.
It's urgent please share as early as possible.
Waiting for your reply,
Regards,
Minesh
Hi Minesh,
Please see the CAD/CAE symbols link under the Design & development section of the ISO124 device folder, here is the Ultralibrarian Link.
Hi Minesh,
Please see section 10 of the datasheet, Layout Guidelines as well. Page 26 and 27 show the mechanical data & dimensions.
Hi Minesh,
Land Pattern footprint pages are something that get 'auto inserted' into the datasheets you find on TI.com. I am not sure why the ISO124 datasheet does not have that included, so we'll look into that for you - it might take a few days to resolve the issue, so we'll get back to you as soon as possible.
Hi Minesh,
Please take a look at the land pattern detail for the UCC1875, you can find that on page 20 of the datasheet. The obvious difference here is that you would not include pins 3-12 and pins 17-26 in your footprint for the ISO124. This drawing should get you what you need.