• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 491 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

USB2ANY: How to use USB2ANY to drive equipment via I2C?

Gust Zhang
Expert 5801 points
Part Number: USB2ANY

Hi Team,

My customer use USB2ANY to drive other equipment from other company via I2C, the attached picture is GUI's display but can't see the I2C. I have searched the user guide about how to use USB2ANY GUI, but not find. From my customer picture, I think the USB2ANY can't be connected correctly.

BR,

Gust

  • 0
    TI__Expert 5801 points

    Do the USB2ANY just support TI EVM? 

  • 0 in reply to Gust Zhang
    TI__Guru 52663 points

    Hi Gust,

    The USB2ANY was never designed to be a generic evaluation and debug tool for customers.  It was always intended to be used with TI software for specific EVMs.  The USB2ANY Explorer tool was released to assist with some debugging tasks for our EVMs, but the infrastructure and documentation is not available to enable customer to use it as an automated debug tool.  I recommend the Aardvark or NI-8451 tools for that purpose.

    Thanks,

    Paul