• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 104 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA569: NC pin connection

Cedrick
Expert 8270 points
Part Number: OPA569

Hi,

Good day.

Our customer wants to know the recommended connection for the NC pin. Do we have a document for this? Please note that this is an aerospace application.

Looking forward to your response. Thank you.


Regards,

Cedrick

  • 0
    TI__Guru* 93105 points

    Hi Cedrick,

    The OPA569 datasheet indicates that an NC pin designation as noted in note (2) NC means no internal connection. It should have a solder pad, but that pad can be floated or tied to whatever is convenient such as ground or a power supply level. I would avoid connecting it to any kind of signal as that may inadvertently be capacitively coupled to an adjacent pin.

    Regards, Thomas

    Precision Amplifiers Applications Engineering