TLE2426: Biasing the non-inverting input to an OpAmp to half V++

Bob Edwards

Part Number: TLE2426

I would like to see a basic circuit diagram which incorporates proper use of a TLE2426 to bias the non-inverting input of an opamp to half the V+ power supply voltage

over 2 years ago

0 kai klaas69 over 2 years ago

Guru 140200 points

Hi Bob,

just connect the output of TLE2426 to the +input of OPAmp.

Here are some examples:

https://www.ti.com/lit/pdf/slaa064

See also this link:

https://tangentsoft.com/elec/vgrounds.html

Kai

0 Raymond Zhang1 over 2 years ago

TI__Mastermind 48086 points

Hi Bob,

Below is an example:

TLE2426 V+ Input 08232021.TSC

If you have additional questions, please let us know.

Best,

Raymond

+1 kai klaas69 over 2 years ago in reply to Raymond Zhang1

Guru 140200 points

Or this way:

bob_tlv2426_1.TSC

Kai

0 Bob Edwards over 2 years ago

Prodigy 210 points

Thank you very much. The TSC file is also appreciated.

0 Bob Edwards over 2 years ago in reply to Raymond Zhang1

Prodigy 210 points

Many thanks. This is a good view!

Amplifiers

Amplifiers forum

TLE2426: Biasing the non-inverting input to an OpAmp to half V++