Hi,
We try to use the AMC1311 for voltage sense control loop.
We need the 100kHz sampling.
Does AMC1311 work for 100kHz sampling voltage sense?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
We try to use the AMC1311 for voltage sense control loop.
We need the 100kHz sampling.
Does AMC1311 work for 100kHz sampling voltage sense?
Hi Kitamura-san,
Can you provide a bit more detail here? Are you trying to measure a 100kHz signal through the AMC1311 or are you trying to sample the AMC1311 output with an ADC at 100KHz sample rate?
We use AMC1311 for industrial AC/DC(LLC Full bridge).
We need monitor the voltage by AMC1311 to control at 100kHz.
As answer your question, we are trying to sample the AMC1311 output with an ADC at 100kHz sample rate.
Is it possible to operate AMC1311 on this control loop at 100kHz?
Hi Yuto,
you can everything sample at 100kHz. That's not the issue. But we are trying to find out what bandwidth the AMC1311 should have in your circuit. So, what is the maximum signal frequency that shall be transmitted by the AMC1311?
Kai