DIYAMP-SC70-EVM

Nathan Lower

Prodigy 10 points

Hello,

Can I please get the PCB design information for DIYAMP-SC70-EVM?

Thank you,

Nate

over 2 years ago

0 Robert Clifton56 over 2 years ago

TI__Mastermind 20830 points

Hi Nathan,

We've actually had a previous customer request this! The gerber files can be found in this thread:

(+) DIYAMP-SOIC-EVM and DUAL-DIYAMP-EVM - Amplifiers forum - Amplifiers - TI E2E support forums

Let me know if you need anything else!

Best Regards,

Robert Clifton

0 Nathan Lower over 2 years ago

Prodigy 10 points

Hello,

This is for the DIYAMP-SOIC-EVM. I am in need of the data for DIYAMP-SC70-EVM

Thanks,

Nate

0 Robert Clifton56 over 2 years ago in reply to Nathan Lower

TI__Mastermind 20830 points

Hi Nathan,

Sorry for the confusion. It was labelled as PA025A Gerbers in that post. I should have clarified that. For your convenience here's the zip file.

PA025A_Gerbers.zip

Best Regards,

Robert Clifton

0 Nathan Lower over 2 years ago in reply to Robert Clifton56

Prodigy 10 points

Hi Robert,

No problem, I found that link earlier to PA025A_Gerbers.zip

I opened the Gerber data and the board is DIYAMP-SOIC-EVM.

The board for DIYAMP-SC70-EVM should be different to accommodate the SC70 package size.

Can you provide that one?

Thanks,

Nate

+1 Robert Clifton56 over 2 years ago in reply to Nathan Lower

TI__Mastermind 20830 points

Hi Nate,

Thanks for being patient with me on this! I didn't realize that I grabbed the wrong board number! This time I triple checked everything to make sure I got the right information to you.

AMPS008A_Gerbers.zip.

Again very sorry for the confusion!

Best Regards,

Robert Clifton