TLV9051: Alternate P/N required - TLV9051IDBVR

HARI T O1

Part Number: TLV9051
Other Parts Discussed in Thread: OPA992, TLV9151, OPA991, TLV9001, , TLV9101, TLV9061, OPA990, TLV9041

Dear Team,

Could you please an alternate P/N for TLV9051IDBVR.I am using it as a unity gain buffer.

Please see the circuit below.I need the same package as that of TLV9051IDBVR.

Currently, I selected OPA316IDBVR as a replacement. Need to find few more with the same package. Don't know when this will be finished in Digikey

Regards

HARI

0 Clemens Ladisch over 2 years ago

Guru 243220 points

Do you have any requirements on GBW, slew rate, offset voltage, or noise?

Similar devices are TLV9151 or OPA991/OPA992.

0 HARI T O1 over 2 years ago in reply to Clemens Ladisch

Expert 1215 points

Hi Clemens,

I don't have any strict concerns on GBW, slew rate, offset voltage, or noise.

Regards

Hari

0 HARI T O1 over 2 years ago in reply to HARI T O1

Expert 1215 points

Hi Clemens,

I don't have any strict concerns on GBW, slew rate, offset voltage, or noise.

The P/N given by you are not available in Digikey

Regards

Hari

0 Clemens Ladisch over 2 years ago in reply to HARI T O1

Guru 243220 points

I was asking because the TLV9051 is faster than the cheaper and more common TLV9001.

Anyway: TLV9041, TLV9061, TLV9101, TLV9151, OPA990

0 HARI T O1 over 2 years ago in reply to Clemens Ladisch

Expert 1215 points

Hi Clemens,

Thank you very much.

Regards

HARI

Amplifiers forum