This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA140: Is the op amp susceptible to source impedance distortion like older JFET op amps

Part Number: OPA140
Other Parts Discussed in Thread: OPA134, OPA1642

Hello,

Is OPA140  susceptible to source impedance distortion like older JFET op amps?

The data sheet does not say anything about that distortion and how to minimize it.

For example OPA134 (which is pretty old) data sheets gives some recommendation how to minimize the distortion caused by source impedance.

Any information about that would be highly appreciated.

Thanks in advance