This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV3605: Hysteresis control with external voltage instead of resistor

Part Number: TLV3605


I would like to check is it valid to configure the hysteresis voltage by using an external voltage instead of resistor. The datasheet doesn't mention controlling with external voltage but the simulation model do include this as note. The simulation model is saying by inputting 0.8V to 1.25V at LE/HYST pin can create a hysteresis voltage of up to 60mV. Is this valid?