LF356: Regarding Are there possible to use 6.9 Typical Characteristics for LF356

Shinichi Inoue

Guru 19671 points

Part Number: LF356
Other Parts Discussed in Thread: LF156

Dear Specialists,

My customer is considering LF356 and has a question.

I would be grateful if you could advise.

---

Regarding LF356 datasheet P.8 of 6.9 Typical Characteristics, it is described for LF155 and LF156.

These are not for LF356.

Are these possible to use for LF356 ?

If not, could you please provide the graphs for LF356.

---

I appreciate your great help in advance.

Best regards,

Shinichi

over 1 year ago

+1 Clemens Ladisch over 1 year ago

Guru 243120 points

As shown in section 6.3, the main difference between 15x/25x/35x is the allowed temperature range. The typical characteristics are usually shown at 25 °C, so they are the same for all models.

+1 Jerry Madalvanos over 1 year ago in reply to Clemens Ladisch

TI__Mastermind 22361 points

Hey Shinichi-san,

Clemens is correct. You can expect similar performance between the 15x graphs and the 35x.

Best,
Jerry

0 Shinichi Inoue over 1 year ago

Guru 19671 points

Hi Clemens and Jerry,

Thank you for your reply.

I understand the graphs can use for LF356.

I'll share this information with the customer.

I appreciate your great help and cooperation.

Best regrds,

Shinichi

Amplifiers

Amplifiers forum

LF356: Regarding Are there possible to use 6.9 Typical Characteristics for LF356