OP830

Lee Payne

Prodigy 50 points

Other Parts Discussed in Thread: TINA-TI, OPA810, OPA830, OPA2830

How do I find simulation net lists for different op-amps?

over 1 year ago

+1 SimaJalaleddine over 1 year ago

TI__Mastermind 22250 points

Hello Lee,

For our amplifies, you can find the netlists in the product folder of the device under the Design & development tab, then select the tab: Design tools and Simulation. These models were created and tested using the simulation tools: Tina-TI and PSpice for TI. However, you may use our unencrypted netlists to import in other simulation tools.

Example using the OPA810:

https://www.ti.com/product/OPA810#design-tools-simulation

Under the Design Tools and Simulation:

Tina-TI Reference Circuit
OPA810 PSpice Model
Impedance Spectroscopy Tina-TI Reference Design

However, it looks like the OPA830 product folder is missing these files. Thank you for bringing this to our attention. I will look into this, and get back to you.

Thank you,

Sima

0 Lee Payne over 1 year ago in reply to SimaJalaleddine

Prodigy 50 points

Thanks Sima,

I am glad not finding the files was not just my mistake.

Thanks

Lee

0 SimaJalaleddine over 1 year ago in reply to Lee Payne

TI__Mastermind 22250 points

Hello Lee,

We found that the files were taken off the web due to a model update, but the updated files were never uploaded to replace the older files. We have submitted the request for internet authorization for both the Tina and PSpice Model and will show up on the product folder within 24-48 hours.

In the meantime, you may use the OPA2830 model: www.ti.com/.../OPA2830

Thank you for notifying us,
Sima

Amplifiers

Amplifiers forum

OP830