XTR300: XTR300

M SANDEEP

Part Number: XTR300
Other Parts Discussed in Thread: XTR305, TIPD155

As per the Reference design of XTR300

TIPD155

It is a Two-Channel Source/Sink Combined Voltage & Current Output. But in this document no where shows the design for Sinking Current output.

over 1 year ago

0 kai klaas69 over 1 year ago

Guru 140200 points

Why opening a new thread?

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1118287/xtr117-xtr117

Kai

0 Luis Chioye over 1 year ago in reply to kai klaas69

TI__Mastermind 49405 points

Hi Sandeep,

Please refer to our previous post, where you ask the same question.

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1118287/xtr117-xtr117

The XTR300 and XTR305 can be configured as 3-wire current transmitters.

The XTR300 and XTR305 can either source or sink current, or provide a positive/negative output as documented both on the XTR300 and XTR305 datasheet or TIPD155.

The standard circuit for current output mode on figure 3 of the datasheet shows the transfer function for the XTR300 and XTR305, where the current output is a function of the input voltage.

Thank you and Regards,

Luis

Amplifiers

Amplifiers forum

XTR300: XTR300

TIPD155