• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 49 subscribers
  • Views 382 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DEM-OPA-SOT-1A: DEM-OPA-SOT-1A

Ekta Patel
Prodigy 10 points
Part Number: DEM-OPA-SOT-1A

Image of this PCB has no standoff screw holes at four corners but PCB layout in the datasheet shows standoff screw holes. Can you confirm if demo board will have standoff holes?

I am looking for assembly drawing and pick and place files for this board to get assembled

  • 0
    TI__Genius 11565 points

    Hello Ekta,

    As it would happen, the image is not of the DEM-OPA-SOT-1A but of a different PCB.  You can verify this by examining the placement of the four SMA connector locations, which do not match between the image and the user guide.  Please use the 2012 revision B user guide for your plans and understanding.  I will see if we have any images to update with website with; I apologize for your confusion.  The DEM-OPA-SOT-1A will have the standoff screw holes you expect from the user guide.

    Best,

    Alec

  • 0 in reply to Alec Saebeler
    Prodigy 10 points

    Can I get Pick and place file and assembly drawing for this board so I can get it assembled?

  • 0 in reply to Ekta Patel
    TI__Genius 11565 points

    Hello Ekta,

    As this EVM is a blank EVM board and you would need to populate the components yourself, TI does not have any pick & place or assembly files for the components on the DEM-OPA-SOT-1A EVM.

    You may use the component descriptions in Section 3 to properly size & select your components.

    Best,

    Alec