LM139A: What test configuration used for Figure 4/5 waveforms in datasheet?

Jim Brinkhurst1

Mastermind 43830 points

Part Number: LM139A
Other Parts Discussed in Thread: LM139-N

Hi Experts

Can someone provide the test configuration used for Figures 4 & 5 in the data sheet?

I’d like to know the input wave forms for both inputs.

Thanks!

Jim B

over 1 year ago

0 kai klaas69 over 1 year ago

Guru 140200 points

Hi Jim,

more details are given in the datasheet of LM139-N.

See also this thread:

https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/355156/lm339a---test-conditions-for-response-time

Kai

+1 Chuck Sins over 1 year ago in reply to kai klaas69

TI__Mastermind 23395 points

Thanks Kai. That previous post is a great resource.

Jim

Thanks for your post. In short those curves are created with VCC = 5V and a VCM = 2.5V. Underdrive is held at 100mV for varying OD levels. Pull-up resistor of 5.1k to 5V. The full description can be found at the post Kai pointed you too.

Chuck

Amplifiers

Amplifiers forum

LM139A: What test configuration used for Figure 4/5 waveforms in datasheet?