• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 124 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV9062: TLV9062 Output Small Signal Response

Jason Haedt
Expert 3230 points
Part Number: TLV9062

Hello,

I downloaded the TLV9062 TINA Reference Design and I am trying to mimic the Output Small Signal Condition presented in that TINA design. 

I created the configuration like this but still not able to achieve the overshoot like in the graph on the reference design:

  • 0
    TI__Mastermind 20830 points

    Hi Jason,

    So I noticed that the configuration that the graph presents has a gain = +1, while your circuit has a gain of -1. Shown below is the graph in the reference design: 

    Also the capacitor should be connected from the output to ground rather than part of the feedback path like this:

    With this circuit I was able to get much closer to the Output Small Signal Condition shown below: 

     

    Let me know if this helps! 

    Best Regards, 

    Robert Clifton