This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA990: OPA990SIDBVR

Part Number: OPA990

Hi,

I am using the OPA990SIDBVR as a buffer. my VCC is 12V and my input voltage is 12V also.

This OpAmp is just for driving a FET (DC, not PWM). The FET has Gate to source resistance of 1Meg.

If i enter the OPA990S to shutdown mode with the shutdown pin, the output voltage will decrease to zero and the FET will disconnect?

Thank you