• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 225 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH9135: LMH9135IRRLR || Info Regarding the swapping of the Differential pairs

Desireddy Teja Reddy
Intellectual 490 points
Part Number: LMH9135
Other Parts Discussed in Thread: AFE7769D

Hi,

Greetings for the day.

For the part LMH9135IRRLR, as we are using in our design  the LMH9135IRRLR Active Balun in our design along with AFE7769D due to layout constraints we want to swap the Differential signals i.e., Swapping the P and N Differential pairs for our layout feasibility.  

In the Datasheet we have observed that the construction is like Passive Balun and an amplifier, In case of normal passive Balun we can swap the differential signals, So can you please let us know whether can we swap the differential signal in our case also.

Thanks and regards,

Desireddy Teja Reddy.