• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 49 subscribers
  • Views 131 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA148-Q1: PART MARKINGS/MOLDING

George Goncalves
Prodigy 10 points
Part Number: INA148-Q1

Hi,

Is this statement true:

Yes, TI does allow the same product having different mold numbers that are used by the product assembler.  TI doesn't dictate the mold numbers that are used by the assembler.

Once the devices are completely assembled and tested, then TI dictates and controls the topside marking whose information is indicated on the mfg label.

Regards, Thomas

Precision Amplifiers Applications Engineering

  • 0
    TI__Guru 60570 points

    Thomas,

    This statement is NOT quite true. Even though it may be true that due to different assembly sites same product may have different molds (especially for different number of channels requiring different packages), TI experiments with different molds and decides what molding compound MUST be used for assembly of a given product.