This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM311: a hysteresis in LM311

Part Number: LM311
Other Parts Discussed in Thread: TINA-TI

Dear sir, please answer

I need to set a hysteresis in LM311. Please, report, should I connect the feedback resistor between pins “COL”  and “+IN” or between pins “COL” and “-IN” ? I understand, that the feedback in this case should be positive, but I am confused by the presence of a transistor at the output of LM311.( because this transistor inverts the signal?)



Vladimir Naumenkov