This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA126: Why output of INA126 is going to 2.5V when Non-Inverting Terminal (Ground) is lower than inverting terminal (1V)

Part Number: INA126


As per below schematic, we supposed to get 0.7V at the output of INA126U, but we get 2.5V at the output in some of the lot of INA126U. May i know why do we get a different result and why not some other voltage like 1.5V or 1V.