INA2141: INA2141U

Venkata,

Sorry, we do not have a model for this device.  

Art

Do you have a similar model which is single amplifier instead of dual like INA2141U i can use by tweaking values ?

Venkata,

It really depends on what you plan on using the model for.  I could put together a very simple model based on op amps.  We have many released INA models as well.  If I put together a model, it could model many of the behaviors of the INA2141u, but it would likely miss on a number of parameters.  Would a basic model that covers noise, offset, bandwidth, and bias current be useful to you?

best regards,

Art

I am planning to use it for amplification with gain of 10. I am performing WCCA for my circuit, with 0.5V max across the inverting and non-inverting terminals with output of 5V max. Basic model will do it for now as long as it is very close. If possible, can you please provide a LTspice model, if not at least pspice model. This is one of the stages of my large circuit i am trying to simulate.