This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMC6082: Voltage Follower Problem

Part Number: LMC6082
Other Parts Discussed in Thread: LMC6482


I made a simple voltage follower with the LM6082 but it don't work as expected, when the input is above 3.65V the output jump to the 5V rail, like in the print below.

I looked the datasheet but I don't get any information about this, besides the OpAmp be Rail-to-Rail.

Does anyone know what's going on? Thanks.