This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM324: LMV324AIDR and LM324ADR/Query

Part Number: LM324


Please note that we're using LMV324AIDR and LM324ADR ICs in our ATL-140 Design, Please refer to our query-
Please note that we're using the OPAMP IC as Buffer.
1. Please note that Voltage at EXT_ADC1 would be around 5.5V.
2. Please refer to the Connection on OPAMP, please note that VCC is 3.3V.
Can you please help to check with your team, will there be any issue if we use the OP AMP circuit like this?