Hi Team,
I have one question about Vo of TLV9004. The DS only gives Vo@25 degrees.
Do you have the data of full temp TA = –40°C to 125°C? I see some TI amps give full temp data, some doesn't. thanks.
Best regards,
Yang
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Team,
I have one question about Vo of TLV9004. The DS only gives Vo@25 degrees.
Do you have the data of full temp TA = –40°C to 125°C? I see some TI amps give full temp data, some doesn't. thanks.
Best regards,
Yang
Figure 7-12 shows how the typical output swing changes with temperature. You could use this to estimate how the worst-case values are affected.
Hi Yang,
Would the figure that Clemens provided work for you?
Best Regards,
Robert Clifton
Hi Clemens, Robert,
Vo is millivolts that I think it's difficult to distinguish in Figure 7-12. Is it possible to get the original test data? thanks.
Best regards,
Yang
Hi Yang,
Is there a particular output current level the customer needs?
Best Regards,
Robert Clifton