This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA211: OPA211

Part Number: OPA211

Dear Sirs

I need to connect for layout reason the Pin_1 with the Pin_2 of the OpAmo OPA211. On the datasheet I read "No internal connection. This pin can be left floating or connected to any voltage between
(V–) and (V+)". It seems that the Pin_1 is connected only to protection circuitry toward V+ and toward V-. Anyway can I do such connection?

Thanks a lot and Regards