The TI E2E™ design support forums will undergo maintenance from July 11 to July 13. If you need design support during this time, open a new support request with our customer support center.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
it looks like Vout is not connected to the wire. Try moving the voltage meter away from the wire and drawing the connection from the end of the voltage meter pin back to the wire. If the wire was connected, there would be a junction dot (like above c4).
