DEM-OPA-SO-2A: Is DEM-OPA-SO-2A ROHS3 Directive (EU) 2015/863 compliant?

Takashi Matsumura

Intellectual 795 points

Part Number: DEM-OPA-SO-2A

Tool/software:

Hi TI team,

Thank you for your support.

1. Is this board ROHS3 Directive (EU) 2015/863 compliant?

2. If so, Can you provide RoHS certification for this part?

Kind Regards,

Takashi

T4728596

5 months ago

0 Alec Saebeler 5 months ago

TI__Genius 17671 points

Hello Takashi-san,

Please see the attached file. The DEM-OPA-SO-2A is RoHS compliant and has an associated PDF document for Declaration of Conformity (DoC). This can be found on the EVM tools folder (website page) under 'Technical Documentation.'

https://www.ti.com/lit/cr/sszqaq6/sszqaq6.pdf

sszqaq6.pdf

Best,

Alec

0 Takashi Matsumura 5 months ago in reply to Alec Saebeler

Intellectual 795 points

Hi Alec-san,

Thank you for your reply.

The problem is DoC only states Directive 2011/65/EU (old) which is 6 substances.

What we asking is Directive 2015/863/EU (Current ROHS) 10 substances, though.

Can you give some advice?

Kind Regards,

Takashi

+1 Alec Saebeler 5 months ago in reply to Takashi Matsumura

TI__Genius 17671 points

Hello Takashi-san,

As this PCB was designed prior to 2015 (and the subsequent enforcement of RoHS (3) occurred in 2019), the DoC was not re-generated to include the addendum of EU 2015/863 for RoHS (3).

The PCB is unpopulated and has no components or parts for a BOM, the EVM ships as only the PCB. Since there are no components to qualify, the PCB was not re-qualified after addendum enforcement. The DoC document does only refer to RoHS (2) 2011/65/EU and does not claim qualification with addendum 2015/863/EU.

Best,

Alec

0 Takashi Matsumura 5 months ago in reply to Alec Saebeler

Intellectual 795 points

Thank you so much Alec-san!

0 Alec Saebeler 5 months ago in reply to Takashi Matsumura

TI__Genius 17671 points

You are welcome Takashi-san!

Amplifiers

Amplifiers forum

DEM-OPA-SO-2A: Is DEM-OPA-SO-2A ROHS3 Directive (EU) 2015/863 compliant?