This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

INA148: Common mode voltage range calculation

Part Number: INA148
Other Parts Discussed in Thread: INA149

Tool/software:

Regarding to INA148, INA149, please share the equation to calculate common mode voltage range.

And also, could you describe common mode voltage range calculation example with below condition ?

Vs+=10V

Vs-=GND(0V)

Vref = 1.65V

In my usage, INA148 or INA149 is used for bi-directional current detection with shunt register.

There is a switch IC to change current direction. So INA148/INA149 can be located on the both high side and low side dynamically.

In high side case, V+ is 200V, power source voltage. In low side case, V+ is GND.

The amplifier output is captured by 3.3V MCU ADC. Vref is half of 3.3V. 

In my understanding, in this condition, common mode voltage range should be larger than 0-200V.

Regards