• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 76 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA145: Question about NC pins

Austin Do
Intellectual 2205 points
Part Number: OPA145

Tool/software:

Hello team,

Can NC pins(1, 5, 8) be connected to GND?

I believe it could be possible, but can you double check there is no wire bonded to the die?

Best Regards,

Austin

  • +1
    TI__Guru 52896 points

    Hello Austin,

    There is no internal bonding connection to the die on NC pins (1,5,8).  These pins can be left floating or connected to GND.

    The internal engineering documentation bonding diagram also confirms, there is no internal bonding connection to the die on NC pins (1,5,8).

    Thank you and Best Regards,

    Luis