• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 135 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

OPA2810: Parameters in datasheet check

Yuxi Liu(Tony)
Intellectual 2230 points
Part Number: OPA2810

Tool/software:

Hi TIer

There are two parameters that have not been found in datasheet. Could you give me some suggestion?
1, open-loop gain with temperature change
2, common mode voltage input range

Thank you very much.

  • 0
    TI__Mastermind 25465 points

    Hello Yuxi,

       OPA2810 has specifications listed at 10V and 24V power supply differential. Both input common-mode voltage and open-loop gain can be found in the parametric tables, and both supply voltages have the same values (pages 6 and 9) which means these specifications are not affected by supply voltage configuration within the recommended operating conditions: 

      

    Thank you,
    Sima